These cooler brackets have over 90 degrees of adjustment, so whether you are mounting them in your bed or underneath your truck you should be able to mount your cooler horizontally, vertically, or anywhere in between.   -Designed to fit most transmission coolers. -Overall...

The Anteater is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring harness...

This is a governor pressure solenoid and transducer. We use these in all of our high pressure valve bodies and they have a 1 year warranty. *Rostra or Transtar - whichever is available at the time of purchase  

Firepunk Switched B&M Stealth Shifter -This shifter is a modified B&M Stealth intended for use with a forward or reverse pattern 3 speed manual valve body. -Overdrive and Lockup are incorporated into the shifter so you do not need to remove your hand from...

We get a lot of questions like "How do I get my truck to sit lower?" and the old answer was always "Cut 1-1.5 coils and that will drop the truck 2-2.5" This also made the truck ride horrible, but you can't always have...

New Valve Body Wiring Harness including the Overdrive and Lockup Solenoids.   We use these in all of our high pressure valve bodies and they have a 1 year warranty.

Firepunk is excited to release our new 47re/48re transmission pans! These pans feature a black powder coated finish. The driver's side of the pan has the fins removed to make mounting a ratchet shifter easier. Pan has both 1/8npt and 1/4npt holes for easy...

Static TV Lever is used to Hold the Throttle Valve at a static position. At Firepunk we use these to set line pressure on all Anteater Installations.

The Anteater Pro is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring...

Cummins 12v Engine Lift Bracket, made to go in the valve cover holes to make lifting a fully dressed engine easy or just pulling a head for a head gasket job easier. Items included will be: -Engine Lift Bracket -Bolts to mount Engine Lift...

This kit is to update your pre 2000 valve body Electronics (Metal Transducer) to the later 2000+ valve body Electronics. You will need to do this for your valve body to work with an Anteater.Included in the kit:2000+ Solenoid Bracket2000+ Transducer2000+ Valve Body Wiring...

47RE Kit Includes: 4 Forward Clutches/ 3 Steels 5 Direct Clutches/ 5 Steels with Machined Pressure Plate and Snap Ring 6 Overdrive Clutches/ 6 Steels with Machined Pressure Plate 10 Overdrive Direct Clutches/ 9 Steels 2nd Gear Band 2nd Gear Servo Spring Pump Bushing...

This is a 8 Pin Case Repair Connector used on the truck side of the wiring harness. At Firepunk we use these for full manual valve body installation if the customer does not already have a harness to use.

Are you looking for all of the parts to swap in a FMVB into your truck? Look no further, this kit has all of the components to swap over your standard Automatic into a FMVB!! This kits includes: -1x Firepunk Diesel High Pressure Full...

Parts Included with kit: -(4) Rear Axle 4 link brackets (1/4" thick steel) -(4) Axle Bracket Doublers -(4) Frame mount 4 link brackets (1/4" thick steel) -(4) Frame Bracket Doublers -(4) 1 1/2" Chromoly links, 16.5" long with chromoly joints -(1) Pan hard Bar...

Our Dodge 47/48 Billet Flexplate is designed for 1994-2007 Dodge Ram Trucks. This flexplate is SFI rated and comes with 12 Converter bolt holes vs. the standard 6 bolt holes.

Designed with a unique 45° center seal and dual outer o-rings, our billet soft plugs are machined in the USA from 6061 aluminum.

Designed with a unique 45° center seal and dual outer o-rings, our billet soft plugs are machined in the USA from 6061 aluminum.

Designed for hard-working Chrysler A618, 47RH/RE and 48RE units, Sonnax heavy duty input shaft 22121B-01 comes with durability and performance features which are second to none. Instead of the OE two-piece shaft/hub design, the Sonnax shaft uses a much stronger, one-piece design that combines...

47RE, 48RE REUSABLE PAN GASKET

Firepunk billet reverse servo retainer for 47/48re transmission

Triple Disc w/ Lifetime Warranty: Choice of Stall Speeds, Billets Supply Piston, Lifetime Warranty, Custom Stall Speeds

Derale Hi-Flow Racing Remote Fluid Coolers Derale is proud to introduce their latest addition to the remote cooler lineup: Hi-Flow Racing remote fluid coolers! These tube-and-fin coolers are precision TIG-welded—and feature the most efficient tube design in the aftermarket, supporting up to 350 psi...

Introducing the 47RE/48RE SFI Transmission Case – a revolutionary advancement in high-performance engineering. Years of collaboration with our manufacturing partners, beginning in 2019, have led to the creation of a product that sets new standards in design, fit, and finish. This SFI Transmission Case...