Cummins 24v Engine Lift Bracket, made to go in the rocker box holes to make lifting a fully dressed engine easy or just pulling a head for a head gasket job easier. Items included will be: - Engine Lift Bracket - Bolts to mount...

****We try to complete all tuning revisions within three business days, but it is dependent on complexity of tuning revision along with current workload. If it has been less than 1 year since the date of purchase for your original tunes you will be...

These cooler brackets have over 90 degrees of adjustment, so whether you are mounting them in your bed or underneath your truck you should be able to mount your cooler horizontally, vertically, or anywhere in between.   -Designed to fit most transmission coolers. -Overall...

03-05 Firepunk Custom Tuning via HP Tuners Included in this tune pack: - 3 Custom Firepunk Tunes: TOW, STREET, and RACE (Race is Max effort for your specific setup) - One year free tuning support ***WE WILL NEED TO RECEIVE YOUR STOCK TUNE FILE...

The Anteater is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring harness...

This is a governor pressure solenoid and transducer. We use these in all of our high pressure valve bodies and they have a 1 year warranty. *Rostra or Transtar - whichever is available at the time of purchase  

Firepunk Switched B&M Stealth Shifter -This shifter is a modified B&M Stealth intended for use with a forward or reverse pattern 3 speed manual valve body. -Overdrive and Lockup are incorporated into the shifter so you do not need to remove your hand from...

Firepunk Ratchet Shifter Mount for 03-09 Ram. This Mount is designed to work with the B&M Stealth Shifter or the TCI Outlaw shifters.

48RE Kit Includes: 4 Forward Clutches/ 3 Steels 6 Direct Clutches/ 6 Steels with Machined Pressure Plate and Snap Ring 6 Overdrive Clutches/ 6 Steels with Machined Pressure Plate 10 Overdrive Direct Clutches/ 9 Steels 2nd Gear Band 2nd Gear Servo Spring Pump Bushing...

We get a lot of questions like "How do I get my truck to sit lower?" and the old answer was always "Cut 1-1.5 coils and that will drop the truck 2-2.5" This also made the truck ride horrible, but you can't always have...

Included in this tune pack: - HPtuners MPVI4 Tuning Interface - HPtuners VCM Scan & Tuning Software (ability to flash ECM and datalog live data to your laptop) - 2 tuning credits included, 2 credits required per truck. - 3 Custom Firepunk Tunes: TOW,...

New Valve Body Wiring Harness including the Overdrive and Lockup Solenoids.   We use these in all of our high pressure valve bodies and they have a 1 year warranty.

Firepunk is excited to release our new 47re/48re transmission pans! These pans feature a black powder coated finish. The driver's side of the pan has the fins removed to make mounting a ratchet shifter easier. Pan has both 1/8npt and 1/4npt holes for easy...

Firepunk Ratchet Shifter Mount for 10-18 Ram. This Mount is designed to work with the B&M Stealth Shifter or the TCI Outlaw shifters. We also offer an add-on to work with a Precision Shifter or Motion Raceworks Shifter.

Static TV Lever is used to Hold the Throttle Valve at a static position. At Firepunk we use these to set line pressure on all Anteater Installations.

The Anteater Pro is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring...

We are so happy to release the newest Smartbox to allow you to easily swap from a 68RFE to a 48re. The Porcupine has a simple plug and play design that plugs right into the 68RFE transmission plug and the 48RE Neutral safety on...

The Firepunk Engineering standalone wiring harness is made to work with the 849 ECM in the stock block mounted location. Processing time is approximately 3-5 business days to ship out.  ***This is not a factory replacement harness!  It is designed for motor/chassis swaps and...

This kit is to update your pre 2000 valve body Electronics (Metal Transducer) to the later 2000+ valve body Electronics. You will need to do this for your valve body to work with an Anteater.Included in the kit:2000+ Solenoid Bracket2000+ Transducer2000+ Valve Body Wiring...

Firepunk Custom UDC Pro/MM3 Tuning for 03-07 5.9L Cummins for the Smarty Touch. This is for 3 tunes. ***WE WILL NEED TO RECEIVE YOUR STOCK TUNE FILE VIA EMAIL TO TUNING@FIREPUNKDIESEL.COM*** UDC Pro/MM3 Instructions  

This is a full bolt on tractionbar kit, no need for a welder. By using box-bolts and self-threading bolts wecan fasten the frame side brackets to a box frame without having to drillthrough both sides of the frame. This allows us to install the...

Firepunk Adjustable Control Arms These control arms are designed to be a direct replacement for your factorycontrol arms. They are a custom bore and width so that all factoryhardware can be used. We use a rebuildable flex joint with a zinc coatedchromoly housing and a...

48re Kit Includes: 4 Forward Clutches/ 3 Steels 6 Direct Clutches/ 6 Steels with Machined Pressure Plate and Snap Ring 6 Overdrive Clutches/ 6 Steels with Machined Pressure Plate 10 Overdrive Direct Clutches/ 9 Steels 2nd Gear Band 2nd Gear Servo Spring Pump Bushing Direct...

Firepunk Ratchet Shifter Mount for 98-02 Extended Cab Ram. This Mount is designed to work with the B&M Stealth Shifter or the TCI Outlaw shifters or an optional Add-on for the Precision shifters.

Shown here is T4 manifold with angled flange. The perfect choice for upgrading to a larger turbo for your truck. The manifold comes complete with all gaskets and turbo mounting hardware.