****We try to complete all tuning revisions within three business days, but it is dependent on complexity of tuning revision along with current workload. If it has been less than 1 year since the date of purchase for your original tunes you will be...

Cummins 24v Engine Lift Bracket, made to go in the rocker box holes to make lifting a fully dressed engine easy or just pulling a head for a head gasket job easier. Items included will be: - Engine Lift Bracket - Bolts to mount...

This package is for 2006-2007 2500 and 3500 model trucks, non Cab & Chassis model trucks(4500 and 5500 models) trucks only. It includes 5 custom tunes for a CSP5 switch so that you can switch between tunes while driving. Our tunes are optimized stock,...

03-05 Firepunk Custom Tuning via HP Tuners Included in this tune pack: - 3 Custom Firepunk Tunes: TOW, STREET, and RACE (Race is Max effort for your specific setup) - One year free tuning support ***WE WILL NEED TO RECEIVE YOUR STOCK TUNE FILE...

These cooler brackets have over 90 degrees of adjustment, so whether you are mounting them in your bed or underneath your truck you should be able to mount your cooler horizontally, vertically, or anywhere in between.   -Designed to fit most transmission coolers. -Overall...

This package is for 2006-2007 5.9 Cummins trucks only. It includes 5 custom tunes for a CSP5 switch so that you can switch between tunes while driving. Our tunes are optimized stock, tow, fuel economy, street, and maximum effort and come with a V3...

The Anteater is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring harness...

Firepunk Ratchet Shifter Mount for 03-09 Ram. This Mount is designed to work with the B&M Stealth Shifter or the TCI Outlaw shifters.

Firepunk is excited to release our new 47re/48re transmission pans! These pans feature a black powder coated finish. The driver's side of the pan has the fins removed to make mounting a ratchet shifter easier. Pan has both 1/8npt and 1/4npt holes for easy...

This is an upgraded BorgWarner governor pressure solenoid and transducer. We use these in all of our high pressure valve bodies and they have a 1 year warranty.  

03-05 Firepunk Custom Tuning via HP Tuners MPVI3 Standard Tuning Interface   Included in this tune pack: - HPtuners MPVI3 Tuning Interface (can tune 200 trucks with additional credit purchase) - HPtuners VCM Scan & Tuning Software (ability to flash ECM and datalog live...

Firepunk Diesel Switched B&M Stealth Shifter -This shifter is a modified B&M Stealth intended for use with a forward or reverse pattern 3 speed manual valve body. -Overdrive and Lockup are incorporated into the shifter so you do not need to remove your hand...

***Due to current supply issues, kits will come with standard Raybestos or Borg Warner clutches***   48RE Kit Includes: 4 Forward Clutches/ 3 Steels 6 Direct Clutches/ 6 Steels with Machined Pressure Plate and Snap Ring 6 Overdrive Clutches/ 6 Steels with Machined Pressure...

We get a lot of questions like "How do I get my truck to sit lower?" and the old answer was always "Cut 1-1.5 coils and that will drop the truck 2-2.5" This also made the truck ride horrible, but you can't always have...

The Anteater Pro is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring...

New Valve Body Wiring Harness including the Overdrive and Lockup Solenoids.   We use these in all of our high pressure valve bodies and they have a 1 year warranty.

This kit is to update your pre 2000 valve body Electronics (Metal Transducer) to the later 2000+ valve body Electronics. You will need to do this for your valve body to work with an Anteater.Included in the kit:2000+ Solenoid Bracket2000+ Transducer2000+ Valve Body Wiring...

The Firepunk Engineering standalone wiring harness is made to work with the 849 ECM in the stock block mounted location.

Firepunk Custom UDC Pro/MM3 Tuning for 03-07 5.9L Cummins for the Smarty Touch. This is for 3 tunes. ***WE WILL NEED TO RECEIVE YOUR STOCK TUNE FILE VIA EMAIL TO LARSON@FIREPUNKDIESEL.COM*** UDC Pro/MM3 Instructions

Static TV Lever is used to Hold the Throttle Valve at a static position. At Firepunk we use these to set line pressure on all full manual valve body installations as well as all Anteater Installations.