These cooler brackets have over 90 degrees of adjustment, so whether you are mounting them in your bed or underneath your truck you should be able to mount your cooler horizontally, vertically, or anywhere in between.   -Designed to fit most transmission coolers. -Overall...

The Anteater is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring harness...

Firepunk is excited to release our new 47re/48re transmission pans! These pans feature a black powder coated finish. The driver's side of the pan has the fins removed to make mounting a ratchet shifter easier. Pan has both 1/8npt and 1/4npt holes for easy...

This is an upgraded BorgWarner governor pressure solenoid and transducer. We use these in all of our high pressure valve bodies and they have a 1 year warranty.  

Firepunk Diesel Switched B&M Stealth Shifter -This shifter is a modified B&M Stealth intended for use with a forward or reverse pattern 3 speed manual valve body. -Overdrive and Lockup are incorporated into the shifter so you do not need to remove your hand...

We get a lot of questions like "How do I get my truck to sit lower?" and the old answer was always "Cut 1-1.5 coils and that will drop the truck 2-2.5" This also made the truck ride horrible, but you can't always have...

The Anteater Pro is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring...

Cummins 12v Engine Lift Bracket, made to go in the valve cover holes to make lifting a fully dressed engine easy or just pulling a head for a head gasket job easier. Items included will be: -Engine Lift Bracket -Bolts to mount Engine Lift...

New Valve Body Wiring Harness including the Overdrive and Lockup Solenoids.   We use these in all of our high pressure valve bodies and they have a 1 year warranty.

This kit is to update your pre 2000 valve body Electronics (Metal Transducer) to the later 2000+ valve body Electronics. You will need to do this for your valve body to work with an Anteater.Included in the kit:2000+ Solenoid Bracket2000+ Transducer2000+ Valve Body Wiring...

Static TV Lever is used to Hold the Throttle Valve at a static position. At Firepunk we use these to set line pressure on all full manual valve body installations as well as all Anteater Installations.

***Due to current supply issues, kits will come with standard Raybestos or Borg Warner clutches***   47RE Kit Includes: 4 Forward Clutches/ 3 Steels 5 Direct Clutches/ 5 Steels with Machined Pressure Plate and Snap Ring 6 Overdrive Clutches/ 6 Steels with Machined Pressure...

This is a 8 Pin Case Repair Connector used on the truck side of the wiring harness. At Firepunk we use these for full manual valve body installation if the customer does not already have a harness to use.

This kits includes: 1x Firepunk Diesel High Pressure Full Manual Valve Body 1x Firepunk Diesel Ratchet Shifter Mount 1x Firepunk Diesel Switched B&M Stealth Ratchet Shifter 1x 8 Pin Repair Harness

Our Dodge 47/48 Billet Flexplate is designed for 1994-2007 Dodge Ram Trucks. This flexplate is SFI rated and comes with 12 Converter bolt holes vs. the standard 6 bolt holes.

Triple Disc w/ Lifetime Warranty: Choice of Stall Speeds, Billets Supply Piston, Free Restall, Lifetime Warranty, Custom Stall Speeds

Parts Included with kit: -(4) Rear Axle 4 link brackets (1/4" thick steel) -(4) Frame mount 4 link brackets (1/4" thick steel) -(4) 1 1/2" Chromoly links, 18" long with chromoly joints -(1) Pan hard Bar kit, 1 1/2" Chromoly bar (you cut to...

Introducing the 47RE/48RE SFI Transmission Case – a revolutionary advancement in high-performance engineering. Years of collaboration with our manufacturing partners, beginning in 2019, have led to the creation of a product that sets new standards in design, fit, and finish. This SFI Transmission Case...

This 29 Spline TCS Fat Billet Output Shaft is used in our Comp 3 transmission as well as some 68rfe to 47/48re conversions.

Designed with a unique 45° center seal and dual outer o-rings, our billet soft plugs are machined in the USA from 6061 aluminum.