Testing at Fleece performance has shown very strong gains in power and much lower EGTs. Dyno results showed 142hp and 380 ft lbs at 2000 rpms on 650 hp truck.

T4 flanged 3rd gen manifold Testing at Fleece performance has shown very strong gains in power and much lower EGTs. Dyno results showed 142hp and 380 ft lbs at 2000 rpms on 650 hp truck.

Shown here is T3 manifold with angled flange. The perfect choice for upgrading to a larger turbo for your truck. The manifold comes complete with all gaskets and turbo mounting hardware.

Shown here is T4 manifold with angled flange. The perfect choice for upgrading to a larger turbo for your truck. The manifold comes complete with all gaskets and turbo mounting hardware.

Shown here is T6 manifold with angled flange. The perfect choice for upgrading to a larger turbo for your truck. The manifold comes complete with all gaskets and turbo mounting hardware.

Amplify your driving experience with a Fleece Performance Holset Cheetah Turbocharger. Featuring a Fleece Performance exclusive 63mm FMW COMP compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 650 RWHP, without sacrificing any drivability. As a 100 percent drop-in...

This is the Taterbuilt 63/67 he351cw direct bolt on upgrade for the 03-07 cummins. This charger will support up to 700RWHP while spooling almost identical to stock. This turbo works great on trucks with stock injectors and just intake exhaust and a tuner and...

Taterbuilt 67/67 he351cw direct bolt on upgrade for the 03-07 cummins. This charger will support up to 775RWHP while spooling close to stock. This turbo works ok on trucks with stock injectors and just intake exhaust and a tuner but we typically recommended a...

TheCummins Stealth 64 is an upgraded, drop-in, replacement turbo for the2003-2007, 5.9L Cummins. It is designed to bolt in and requirenothing other than removing the factory turbo and dropping this one in it’splace. The turbo features a custom profile, 64mm (actual measurement63.5mm) billet wheel...

HE351CW – Cummins 2003-2007 Turbo Upgrade This Turbo Upgrade is one of the quickest spooling turbo's we have tested for the 5.9L Cummins. Even the most experienced enthusiast have a hard time telling the difference between a stock HE351 / HE341 and a 3rd...

On 3 Performance 77mm Turbocharger, T-4 flanged On 3 Performance Stainless Steel Schedule 40 hot pipe On 3 Performance 3.5 to 4 Stainless Steel 304 Downpipe Stainless Steel flex Pipe to Adapt 4 Exhaust SS Lap Bands V-Band Clamps On 3 Performance SS Braided...

T-4 Stainless Diesel Cummins Exhaust manifold. 24v Sled Puller Stainless Diesel exhaust manifolds come with 2 ports drilled and tapped for EGT & Drive. Our Stainless Exhaust mainfolds are made with shell molding. Its a super smooth inside and out casting technology that has...

Over the past few years we have been selling this unit and becoming extremely popular within the Cummins community. We are always stocking this item ready to ship daily. This is designed for the 2003 – 2007 Dodge Ram Cummins turbo diesel trucks. From...

Thermal Zero Premium Fitted Turbocharger Heat shields go above and beyond when it comes to heat tolerance and durability. The inner layer of the heat shield can handle over 2000 degrees Fahrenheit of direct heat. The shields are made of 1 inch of ceramic...

Put the finishing touches on your truck with this high quality Cummins Turbo Drain Tube Kit. The tube is braided stainless steel for durability on the exterior, and corrugate teflon tubing for flow and maximum flexibility. The fittings are 6061 aluminum with black anodize...

Turbo Compressor Discharge Adapter Kit Includes 90 degree Discharge Adapater, S400 Vband Compressor Outlet Clamp, O-ring for 90 degree Turbo Commpressor Discharge Adapter. Vehicle Fitments Ram 3500 2011 to 2018 Ram 2500 2011 to 2018 Dodge Ram 3500 2003 to 2010 Dodge Ram 2500...

The Cummins turbo drain tube adapter is made from high quality 6061 aluminum and anodized black for a superior appearance. It fits into the engine block drain tube location just like the factory drain tube and allows you to route your own 7/8 Inch...

Amplify your driving experience with a Fleece Performance Holset Cheetah Turbocharger. Featuring a Fleece Performance exclusive 63mm FMW COMP compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 650 RWHP, without sacrificing any drivability. As a 100 percent drop-in...

Cummins S300-S400 Turbo Installation Kit 2003-2007 Fleece Performance Kit Contents: FPE-CTDT-KIT FPE-CRTFL-S3S4 Turbo Stud Kit T4 Turbo Gasket Vehicle Fitments Dodge Ram 3500 2003 to 2007 Dodge Ram 2500 2003 to 2007 Additional Attributes Country Of Origin: USA Universal: No Vehicle Type: Truck/SUV Sold...

Stainless Diesel 'Monster Foot' Cummins Exhaust ManifoldT-6 MONSTER FOOT 24v Sled Puller. Stainless Diesel exhaust manifolds come with a bolt-on CNC'd ported center section. 2 ports drilled and tapped for EGT & Drive. Our Stainless EX mainfolds are made with shell molding its a...

Shown here is T4 manifold with angled flange. The perfect choice for upgrading to a larger turbo for your truck. The manifold comes complete with all gaskets and turbo mounting hardware.

The ultimate towing solution for your 03-07 Cummins . The 62 65 He351cw Tow Master Tater Built Turbocharger. This direct bolt-on upgrade turbocharger is engineered specifically for guys towing heavy that are using their truck for a work truck. Ideal for those who demand...

Complete installation kit for CW style turbochargers on the 2003-2007 RAM with 5.9L Cummins.  Kit Includes:  Turbocharger exhaust inlet gasket, T3 non-divided Turbocharger oil drain gasket Turbocharger mounting studs (4) Turbocharger mounting nuts (4) Vehicle Fitments 2003 Dodge Ram 2500/3500 5.9L 24V Cummins 2004...

Shown here is T4 manifold with angled flange and wastegate. The perfect choice for upgrading to a larger turbo for your truck. The manifold comes complete with all gaskets and turbo mounting hardware.