New and approved design! Beans multi function sump (supply/return into one). What we have done at BDP is step the tank sump up a notch. Made from 6061 Billet aluminum, this guy is built like a tank and is super simple to install just...

Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some pretty significant drawbacks including the ?...

AirDog 2 Micron Fuel Filter FF100-2

Airdog Water Seperator WS100

Upgrade your fuel system with this fuel filter delete from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary. The factory fuel filter only becomes an...

Are you removing the injectors and don't want to reuse the seals? You are making the right choice. Replacing the injector seals is cheap insurance that you won't have an issue when you get the truck back together. Don't risk having to do the...

Replacement water in Fuel (WIF) Sensor Plug For Fleece Peformance Fuel Filter Deletes (M14x2.0). Black anodized aluminum. Application Notes: For use with Fleece Performance Fuel Filter Deletes and Distribution Blocks: FPE-FFD-RO-5G, FPE-FFD-RO-4G, FPE-FFD-RO-3G, FPE-FFD-RO-3G-67, FPE-FFD-RF-3G, FPE-FFD-RF-3G-67, FPE-FFD-RF-4G Vehicle Fitments Ram 3500 2011 to 2018...

Have your feed tubes been in service for some time?  Might there be a chance that the extended hot cranking you've been experiencing is due to leakage at the feed tube/injector interface? Then we highly recommend that the feed tubes be replaced whenever the...

Designed to be fitted to the lines running from the CP3 high pressure pump to your fuel rail and between fuel rails, the Exergy fuel line locks capture your fuel line nuts to prevent them from backing off due to vibrations induced by moving...

This kit comes with 2 Exergy Performance Line Nut Locks! Designed to be fitted to the lines running from the CP3 high pressure pump to your fuel rail and between fuel rails, the Exergy fuel line locks capture your fuel line nuts to prevent...

Are you seeing intermittent rail pressure fluctuations that are causing running issues? The rail pressure sensor may be the root cause.   The fuel pressure sensor is a crucial part of the high pressure fuel system. It effectively measures fuel pressure allowing for proper...

Do you have an engine lope at idle or surging while driving? Are you seeing unusual rail pressure fluctuations? Your 6.7 Inlet Metering Valve may be the root cause.    Also known as the FCA (fuel control actuator) or the MPROP, this component can...

The PowerFlo lift pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp! Features: Direct OEM In-Tank Replacement: The PowerFlo Lift Pump retains...

Replacement high pressure fuel lines from Fleece Performance.? These are a direct replacement for your cracked, broken, or leaking injector lines.? Replaces Cummins part number 4935981 on cylinder 1. Fits: 07.5-18 6.7L Dodge Cummins Vehicle Fitments Ram 2500 2011 to 2018 Ram 3500 2011...

Introducing our all-new full featured auxiliary fuel filter kit for the 2003-2018 Dodge Cummins. This kit builds off our standard auxiliary kit with the addition of an integral high-flow fuel heating element and Water-In-Fuel (WIF) sensor. The kit includes everything you need to properly...

Cummins Dual Pump Spoke Pulley(for use with FPE dual pump bracket) RED Vehicle Fitments Ram 3500 2011 to 2018 Ram 2500 2011 to 2018 Dodge Ram 3500 2003 to 2010 Dodge Ram 2500 2003 to 2010 Additional Attributes Country Of Origin: USA Universal: No...

Upgrade your fuel system with this fuel distribution block from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as an Air Dog or a FASS and dual CP3 pumps, this fuel block will allow you to get rid of your...