The Fleece Performance Duramax 10mm stroker CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications. Not only will it support 750 RWHP, but it also eliminates the factory fuel flow restiction that begins...

The Fleece Performance CP3K is a modified Duramax LBZ CP3 designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to...

If you're running an aftermarket positive displacement lift pump like our PowerFlo on your Duramax our fuel primer bulb sealing kit will allow you to eliminate the leak prone primer bulb from your fuel system. The sealing cap includes a 1/8 inch NPT port...

The return fuel pressure test port for the 2011-2016 LML Duramax is designed to aid the technician in troubleshooting return fuel pressure, often necessary when diagnosing CP4 pump failures. When installed in the return fuel system, it allows for a pressure gauge to be...

Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some pretty significant drawbacks including the ?...

Problem: If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some pretty significant drawbacks including the ?...